Shine Eyes
Water-resistant. Ease of installation. Very long life.
The Shine Eyes module is a high flux output, water resistant module for backlighting applications. It produces a smooth 140 degree beam and contain 4 SMD LEDs packaged in an ABS mountable case. It is available in a continuous chain of 25 modules with a 105mm separation and can be cut at any point. The Shine Eyes module is perfect for signage channel lettering, architectural backlighting and many other backlighting applications.
|
|
|
Installation
The Shine Eyes module can be affixed using the self-adhesive tape on the back of the panel and further secured by screwing it onto your sign through the mounting holes on the sides of the product. You may cut the modules from the chain or add more modules to get the brightness you want.
Features
- Over 50,000 hour life
- Available in cold white (7000K)
- 140 degree beam spread
- High lumens output
- Secure down via self adhesive tape or via 2 screws
- Very little heat produced by the module
- Low power consumption - 1.2w per module
- Small dimensions - 33x33mm main body size and 8mm tall
- 2 year warranty
|
|
|
Warranty
LED Fittings & Modules (Shine Eyes) are covered by a 2 year manufacturer's warranty against defects on workmanship or materials used. The warranty service is limited to the replacement or repair of the smallest LED segment that become defective under normal usage, as determined by Hotbeam. This warranty does not cover LED Fittings & Modules (Shine Eyes) that have been abused, improperly used or disassembled. Except as stated above, no other express warranty applies. Any liability for indirect, incidental or consequential damages arising from the failure of the Lamp is excluded.
|
